
Достаточно уникальная жестянка. Удерживает все три типа фирменных интерфейсов: Sony, Mitsumi, Panasonic.
Дополнительная информация:
Порылся по Инету, изготовитель молчит. А вишь компания Acer, которая организовывала данный контроллер в свои машины, после некоторого пинания разродилась:
Connector Functions
Name Function
J1 Sony Cd – Rom Connection
J2 Mitsumi Cd – Rom Connection
J3 Panasonic Cd – Rom Connection
J4 Sony Audio – In
J5 Panasonic Audio – In
J6 Mitsumi Audio – In
J7 Speaker Out
Jumper Functions
I/O Port Selection
Name 299h 322h 289h 324h
Jp1 1 2 2 3 1 2 2 3
Jp2 1 2 1 2 2 3 2 3
Mitsumi Irq Selection
Name Irq9 Irq9 Irq12
Jp3 1 2 3 4 5 6
Cd – Rom Mode Selection (Jumper On indicates selection)
Name Selection
Jp4 Panasonic Mode
Jp5 Sony Mode
Jp6 Mitsumi Mode
Sony Irq Selection
Name Irq9 Irq9 Irq11
Jp7 1 2 3 4 5 6
Sony Dma Selection
Name Dma1 Dma2 Dma3
Jp8 1 2 3 4 5 6
Jp9 1 2 3 4 5 6
Driver Information
Mitsumi Cd – Rom
Mtmcde. Sys – Dma Transfer
Mtmcds. Sys – Non Dma Transfer
Add/Modify Config. Sys file
Device C:\ Mtmcde. Sys /D: Name /P: Xxx /I: X
Where /D: specify the driver name of Mtmcde. Sys to be used with Mscdex. Exe.
/P: Specify Cd – Rom I/O Port (must be matched with Jp1 Jp2 setting.
/I: specify Irq of Cd – Rom (must be matched with Jp3 setting.
Note: Wdh – 7000C Does not support Dma Transfer Mode, you should not use the /T: X
parameter with Mtmcde. Sys
Add/Modify Autoexec. Bat file C:\ Path\ Mscdex. Exe /D: Name
Where /D: specify the driver name of Mtmcde. Sys or Mtmcds. Sys
Reboot the system.
Panasonic/Matsushita Cd – Rom
Add/Modify Config. Sys file Device C:\ Cdmke. Sys /D: Name
Where /D: specify the driver name of Cdmke. Sys to be used with Mscdex. Exe.
Add/Modify Autoexec. Bat file C:\ Path\ Mscdex. Exe /D: Name
Where /D: specify the driver name of Cdmke. Sys.
Reboot the system.
Sony Cd – Rom
Add/Modify Config. Sys file Device C:\ Slcd. Sys /D: Name /B: Xxx /M: X /T: X
Where /D: specify the driver name of Slcd. Sys to be used with Mscdex. Exe.
/B: Specify Cd – Rom I/O Port (must be matched with Jp1 Jp2 setting.
/M: specify the data mode, p polled I/O, d Dma which requires the /T: parameter.
/T: specify the Dma channel (must be matched with Jp5 Jp6 setting.
Add/Modify Autoexec. Bat file C:\ Path\ Mscdex. Exe /D: Name
Where /D: specify the driver name of Slcd. Sys
Reboot the system.
More Information:
Drivers are available for this controller on the Acer Bbs and Ftp Ftp: //Ftp. Acer. Com,
the file name is Pnscd. Exe
If installing a network card in systems with this controller be sure that the I/O base
address does not directly conflict with the address used by the controller. The default
base address 299h, is also the default base address for many network cards.